ECLIPSE Ji

Smart Imaging System

Request Information

Specifications

ECLIPSE Ji
Observation methods Brightfield, Epi-fluorescence
Optical system CFI Infinity Optical System
Observation Optical System: Inverted image observation

FOV 25

Optical path switching: Switching between the built-in camera optical system and the left side port
Built-in camera Imaging device: 7.8 megapixel monochrome CMOS sensor
Output signal Tone: Monochrome 12 bits/8 bits

Frame rate: Maximum 18 fps
Output pixel number: 2800×2800 pixels (when assay used)
Focusing Drive system: Motorized (Via PFS nosepiece objective lens up/down movement)Focusing stroke: About 10 mm
Focusing speed: Maximum driving speed 2.5 mm/sec
PFS* Focal point maintenance control: Infrared light projecting method
Applicable observation methods:
Brightfield, Fluorescence observation
Transmission illumination section Koehler illumination Light source: LED
Stage Stroke: X: ±59 mm, Y: ±39.5 mm
Maximum drive speed About 25 mm/sec
Nosepiece Objective lens mounting holes: 6
Nosepiece drive method: Motorized
Fluorescence cube turret Number of filter cubes that can be mounted: 6
(Compatible with wide-field filter cubes)
Turret
drive method: Motorized
Light distribution section Light source used: D-LEDI2 fluoresce LED light source
PC interface USB interface: Device interface (for built-in camera)
B connector
USB 3.0 (SuperSpeed)
Input rating 100V-240VAC±10%, 3.0 A, 50/60 Hz
Power consumption 320 W
Power source cord - 100 to 120 V: Power source cord of 3 conductor grounding Type SVT, NO.18 AWG, 3 m long maximum, rated at 125VAC minimum with detachable receptacles conforming to UL specifications
- 220 to 240 V: Power source cord of 3 conductor grounding Type H05VV-F 1 mm2, 3 m long maximum, rated at 250VAC minimum with detachable receptacles conforming to EU/EN specifications

*PFS: a function that automatically corrects focal point displacement due to the passage of time and/or stage movement.