Macro Confocal Microscope System

Specifications

AZ-C2+
AZ100 optical zoom1-8x (zoom ratio 8 : 1)
C2+ confocal scan zoom1x-1000x (continuous variable)
StandAZ-STE EPI stand/AZ-STD DIA stand
Focus range: 85 mm stroke
Coarse focus: 18.5 mm/rotation
Fine focus: 3.27 mm/rotation
Stage focus: 10 mm range with 0.27 mm/rotation
Under software control with remote focus accessory
ObjectiveAZ-Plan Apochromat 0.5x (NA 0.05/W.D. 54 mm), AZ-Plan Apochromat 1x (NA 0.1/W.D. 35 mm), AZ-Plan Fluor 2x (NA 0.2/W.D. 45 mm), AZ-Plan Apochromat 4x (NA 0.4/W.D. 20 mm), AZ-Plan Fluor 5x (NA 0.5/W.D. 15 mm)
Laser unitLU-N3: installed laser 405 nm, 488 nm, and 561 nm
LU-N4/N4S: installed laser 405 nm, 488 nm, 561 nm, and 640 nm
LU-NV series: mountable laser 405 nm, 445 nm, 458 nm, 488 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm and 647 nm
PowerConfocal system (PC, monitor, C2+ controller, AOM controller): Approx. 830 W (single phase AC 115 V, 7.2 A / AC 230 V, 3.6 A, with earth)
(Does not include microscopes and lasers.)
Standard fluorescence detectorAZ-C2+
Number of channels3 channels
Display mode160 x 160 to 2048 x 2048 pixels
Scanning speedStandard mode:2 fps (512 x 512 pixels, bi-direction)
Zoom:1-1000x
Fast mode:8 fps (512 x 512 pixels, bi-direction)
Zoom:8-1000x
Spectral detector (C2si+)AZ-C2+
Number of channels32 channels
1st dichroic mirror20/80 beam splitter
Corresponding wavelength400–750 nm
Wavelength resolution2.5/5/10 nm (switchable)
Minimum wavelength step0.25 nm
Display mode160 x 160 to 1024 x 1024 pixels
Scanning speedStandard: 0.5 fps (512 x 512 pixels, 32 channel simultaneous recording )