AX R MP with NSPARC

Infinity optical system

AX-FNSP Single Stand

AX-FNGP Gate Stand

AX-FN Focusing Nosepiece Unit
Motorized coaxial coarse/fine focusing
Focusing stroke: Up 13 mm/Down 2 mm^{*1, *2}, Minimum step: 0.02 μm, Motorized escape and refocus mechanism
Focal plane: 400 mm above the surface of the vibration isolated table

AX-FNCTL Control Box
AX-FNHC Hub Controller (For controlling Focusing Nosepiece Unit, Diascopic Illumination System, Stage Joystick, Motorized Epi-fluorescence Cube Turret, Motorized Quadrocular Tilting Tube 2 and DSC Zooming Port)

AX-FNSA Stage Adapter, supporting both manual and motorized XY stages. Stage height: adjustable to 2 positions depending on sample size (400 mm/200 mm from the surface of the vibration isolated table)

FN-3PS2 XY stage, Cross travel 29.5 (X) x 29.5 (Y) mm, with 2 auxiliary plates
AX-FNS-E Motorized XY stage, Cross travel ±34 (X) x ±27 (Y) mm

NI-FLEI-2 Epi-fluorescence attachment

D-LEDI Fluorescent LED Illumination System

6 mountable filter cubes, shutter function

• NI-FLT6 Epi-fluorescence Cube Turret
• NI-FLT6-I Intelligent Epi-fluorescence Cube Turret
• NI-FLT6-E Motorized Epi-fluorescence Cube Turret

AX-FNBPU Stimulation Back Port, 6 mountable filter cubes, Fluorescence imaging and simultaneous stimulation imaging can be switched

AX-FNDIA Diascopic Unit
4 filter slider attachable, Condenser holder stroke: Up 2.5 mm/Down 1.8 mm, NI-PT Polarizer Turret mountable

—

C-LL High Color Rendering LED Lamphouse

—

NI-SH-E Motorized Shutter

—

FN-C LWD condenser, O.D. 8.2 mm, NA: 0.78

—

NI-PT Polarizer Turret, Visible or infrared polarizer attachable

—

Pupillary distance: 50-75 mm, Inclination angle: 15-35 degrees, Eyepiece/Upper port/Rear port: 100/0/0, 0/100/0, 0/0/100 via DSC Zooming Port

• NI-TT2 Quadrocular Tilting Tube 2, With interlock function
• NI-TT2-E Motorized Quadrocular Tilting Tube 2, With interlock function

CFI 10X (22), CFI 12.5X (16), CFI 15X (14.5), CFI UW 10X (25)

AX-NEU Non-descanned EPI Upright Detector

• FN-S2N CFI60 Sliding Nosepiece, Forward-backward sliding type, two positions, DIC prism slider can be attached
• FN-S2N-2 CFI90 2 Place Sliding Nosepiece^*5, Forward-backward sliding type, two positions, DIC prism slider can be attached to the front objective
• FN-MN-H CFI75 Holder^*5, one position, DIC prism slider can be attached
• FN-MN-H2 CFI90 Holder^*3, one position
• AX-FNTN-H CFI75 Single Tilting Nosepiece^{*3, *4, *5}, one position

Brightfield, Epi-fluorescence, DIC

100W

66 kg (fully motorized fluorescence system, with diascopic illuminator)

66 kg (fully motorized fluorescence system)

AX-SHRM AX R MP Scan Head & Controller

φ22 mm

Galvano scanner
Pixel size: max. 8192 x 8192 pixels
Scanning speed: max. 240 fps (512 x 16 pixels), 10 fps (512 x 512 pixels)

Resonant scanner
Pixel size: max. 2048 x 2048 pixels
Scanning speed: max. 720 fps (2048 x 16 pixels for 2K, 1024 x 16 pixels for 1K), 30 fps (2048 x 512 pixels for 2K, 1024 x 512 pixels for 1K)

Line scanning, bi-direction scanning and averaging

Max. 5 channels (including a diascopic detector channel)

700-1080 nm (1080 system), 820-1300 nm (1300 system)

Position: 6

6-153 µm variable

1–1000X continuously variable

2 laser input ports
2 signal output ports

Mai Tai HP/eHP DeepSee, Chameleon Vision II, Axon 920^*6,Chameleon Discovery LX

Chameleon Vision II + Axon 920^*6, Axon 920^*6 + Axon 1064^*7, Chameleon Discovery LX + Axon 920^*6

InSight X3 + InSight X3+, Chameleon Discovery NX

InSight X3 Dual Option, InSight X3+ Dual Option, Chameleon Discovery NX, Chameleon Discovery NX + Axon 920^*6

700-1080 nm (1080 system), 820-1300 nm (1300 system), auto alignment

Method: AOM (Acousto-Optic Modulator) device
Control: power control, ROI exposure control

405 nm, 488 nm, 561 nm and 640 nm lasers are installed

405 nm, 488 nm, 561 nm, 594 nm and 640 nm lasers are installed

405 nm, 445 nm, 488 nm, 515 nm, 561 nm and 640 nm lasers are installed

Detectable wavelength range: 400-650 nm (1080 system), 400-750 nm (1300 system)

Detectors: 2 GaAsP PMTs (4 GaAsP PMTs, or 3 GaAsP PMTs + 1 multi-alkali PMT are possible by adding options)

Stimulation wavelength: 405 nm, 488 nm, 561 nm;
Excitation wavelength for imaging: 800-1080 nm (1080 system), 820-1080 nm (1300 system)
Stimulation speed: Max. 1 ms (point stimulation), Max. 20 μs/pixel (ROI stimulation)
Stimulation modes: simultaneous, sequential, manual
Stimulation area: square inscribed within a 22 mm-diameter circle, stimulation ROI: arbitrary pattern, no number limit

Detectable wavelength range: 400-920 nm
Detector: Multi-alkali PMT

Detectable wavelength range: 400-650 nm (with IR laser), 400-750 nm (with visible laser); Detection width: 10 nm to 320 nm
Maximum pixel size: 8192 x 8192 (with galvano scanner)
Wavelength resolution: 5 nm, wavelength range variable in 1 nm steps
Compatible with galvano and resonant scanners

2 or 4 channels (Multi-alkali PMT or GaAsP PMT options)

Detectable wavelength range: 400-750 nm
2 or 4 channels (Multi-alkali PMT or GaAsP PMT options)

Equipped with SPPC (Single Pixel Photon Counter) array detector
Up to 7 barrier filters can be mounted (Mountable filter: QuadBand446/523/600/677, 452/45, 525/50, 593/46, 700/75)
With galvano scanner: Can be used with X resolution of 64 to 8192 pixels, Y resolution of 2 to 8192 pixels
With resonant scanner: Can be used with X resolution of 256, 512, 1024 and 2048 pixels, Y resolution of 128 to 2048 pixels

Motorized XY stage (for AX-FNSP/FNGP/Ti2-E), High-speed piezo Z stage (for Ti2-E), High-speed piezo objective-positioning system (for AX-FNSP/FNGP)

AX-FNTN-H CFI75 single tilting nosepiece^*4

Imaging software (equipped with Denoise.ai noise reduction function): NIS-Elements C or NIS-Elements C-ER

2D analysis, 3D volume rendering/orthogonal, 4D analysis, spectral unmixing

JP2, JPG, TIFF, BMP, GIF, PNG, ND2, JFF, JTF, AVI, ICS/IDS

FRAP, FLIP, FRET(option), photoactivation, 3D time-lapse imaging, multipoint time-lapse imaging, colocalization

Windows®10 Pro 64 bit, Microsoft Windows® 11 Pro^*10

Stimulation wavelength: 405 nm, 488 nm, 561 nm
Excitation wavelength for Imaging: 800-1080 nm (1080 system), 820-1080 nm (1300 system)

Dedicated AX-FNSP/AX-GNGP motorized upright microscope system, ECLIPSE Ti2-E motorized inverted microscope

AX-FNSP/FNGP: 0.02 µm, Ti2-E: 0.02 µm

Temperature 20 - 25˚C, ± 1˚C, air conditioning at all hours
Humidity 60% RH or less (no condensation)

Stimulation wavelength: 1030-1070 nm, 900-950 nm
Excitation wavelength for imaging: 750-950 nm, 1030-1070 nm
Scanner: Galvano scanner × 2
Stimulation speed: Max. 0.1 ms (point stimulation)
Stimulation area: square inscribed within a 22 mm-diameter circle
Stimulation ROI: arbitrary pattern, Stimulation number: max. 100, Power setting: max. 3 steps for each ROI