ECLIPSE Ti2 Series

Sistemas de Microscopia Invertido

Pedir informação

Specifications

Main body ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
Optical system Infinity-corrected CFI60
Field number*2 22 with C-mount, 25 with F-mount
Intermediate Magnification switching Manual switching of 1.0X/1.5X (exchangeable from 1.5X to 2.0X)
Status detection -
Bertrand lens Manual in/out, and manual focus, Status detection -
Output port 4 Motorized positions


Eyepiece 100%, left 100%, right 100%, eyepiece 20%/left 80%


(Ti2-E/B: bottom 100%)		 4 Manual positions


Eyepiece 100%, left 100%, right 100%, option (to eyepiece


20%/left 80% or eyepiece 20%/right 80%)
Can add ports by use of back port unit and/or choice of tube base unit*3
Focusing unit Motorized drive, Coarse/fine focus changeover, 10mm stroke, Minimum increments: 0.01 μm, 0.02 μm (with encoder control) Manual drive, Coarse/fine focusing knob, 10 mm stroke
Stage up Available*4
Tube body ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
Binocular tube Binocular S tube TC-T-TS (field number 22), Ergonomic ER tube TC-T-ER (field number 22)
Motorized eyepiece tube base unit for external PH (Ti2-T-BP-E) Camera port (field number 16), Motorized PH turret with 4 motorized positions -
Assist eyepiece tube base unit (Ti2-T-BA) Assist camera (field number 22), Status detection -
Eyepiece tube base unit with port (Ti2-T-BC) Camera port (field number 16) - Camera port (field number 16)
Transmitted illumination ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
Pillar for transmitted illumination (Ti2-D-PD) Condenser vertical stroke: 66 mm, Backward tilting up to 25 degrees, With field diagram and refocusing mechanism 2 filter slot positions (4 filter position option is also available with Filter Slider for transmitted illumination (Ti2-D-SF))
LED Lamphouse for dia illumination (Ti2-D-LHLED) High power LED
High Color Rendering LED Lamphouse (C-LL) High color rendering LED
Precentered Lamphouse (D-LH/LC) 100W halogen bulb (pre-centered)
Condenser ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
Motorized condenser turret (Ti2-C-TC-E) 7 motorized positions (ø37mm x4, ø39mm x3), LWD/ELWD/CLWD/NAMC condenser lenses are supported -
Intelligent condenser turret (Ti2-C-TC-I) 7 manual positions (ø37 mm x4, ø39 mm x3), Status detection, LWD/ELWD/CLWD/NAMC condenser lenses are supported -
Condenser turret (TC-C-TC) 7 manual positions (ø37 mm x4, ø39 mm x3), LWD/ELWD/CLWD/NAMC condenser lenses are supported
ELWD-S condenser turret (TE-C) 4 manual positions, With ELWD condenser lens (NA0.3/O.D.=65)
HNA condenser slider (Ti2-C-SCH) 2 manual positions (ø37 mm x1, ø39 mm x1), HNA dry lens/HNA oil lens are supported
Condenser lens LWD (O.D.=30 mm, NA=0.52), ELWD (O.D.=75 mm, NA=0.29), CLWD (O.D.=13 mm, NA=0.72), HNA dry (O.D.=5 mm, NA=0.85), HNA oil (O.D.=2 mm, NA=1.4), NAMC (O.D.=44 mm, NA=0.4)
Stage ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
Motorized stage (Ti2-S-SE-E, Ti2-S-SS-E) Stroke X: ±57 mm, Stroke Y: ±36.5 mm, Max drive speed: approx. 25mm/sec, Magnetic sample holder -
Stage (TC-S-SR, TC-S-SRF) Stroke X: ±57 mm, Stroke Y: ±36.5 mm, Adjustable stroke range (3 levels) with adjusting pin, Long/middle/short handle options available
Gliding stage (TC-S-GS) Stroke ø20 mm
Nosepiece ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
Perfect Focus Unit with motorized nosepiece for Auto Correction Collar (Ti2-N-NDA-P) 5 motorized positions,
Water-resistant*5		 -
Motorized DIC sextuple nosepiece (Ti2-N-ND-E)


Perfect Focus Unit with motorized nosepiece (Ti2-N-ND-P)


Perfect Focus Unit with motorized nosepiece for MP (Ti2-N-NDM-P)		 6 motorized positions,
Water-resistant*5		 -
Intelligent DIC sextuple nosepiece (Ti2-N-ND-I) 6 manual positions, Status detection, Water-resistant*5 -
Sextuple nosepiece (Ti2-N-N), DIC sextuple nosepiece (Ti2-N-ND) 6 manual positions, Water-resistant*5
Epi-filter turret ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
Motorized epi filter turret (Ti2-F-FLT-E, Ti2-F-FLTH-E) 6 motorized positions, Motorized shutter -
Intelligent epi filter turret (Ti2-F-FLT-I) 6 manual positions, Manual shutter, Status detection*6
Filter wheel/shutter ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
Motorized BA filter wheel (Ti2-P-FWB-E) 7 motorized positions, High speed mode: 50ms, Low vibration mode: 100ms (movement time between adjacent positions) -
Motorized shutter (Ni-SH-E)*7 12ms to open/close
Epi-fluorescence attachment ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
EPI-FL module (TI2-LA-FL-3) Supports fiber illuminator; includes 2-position filter slider and aperture diaphragm
Field stop slider Circular (TI2-F-FSC), rectangular (TI2-F-FSR), square (TI2-F-FSS) aperture options
Control unit ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
Controller, display device Stage joystick (TI2-S-JS-SS), Tablet Tablet -
Controller for Ti2-E (TI2-CTRE) USB/LAN interface, I/O function -
Operating environmental ECLIPSE Ti2-E/Ti2-E/B*1 ECLIPSE Ti2-A ECLIPSE Ti2-U
Temperature: 0℃+40℃, Humidity: 60% RH max. (at +40℃, no condensation), Indoor use only

Motorized accessories have a status detection function

*1 Motorized model with a bottom port
*2 Limitations apply based on objective and filter cube choice, stage-up configuration, and illumination module, etc.
*3 Tube base units with a port cannot be used with Ti2-A
*4 Stage up kit is required. Please contact Nikon.
*5 This product is not waterproof. Water-resistant properties are only guaranteed when all specified conditions below are satisfied.
*6 Status detection cannot be used when attached to the Ti2-U
*7 Ni-SH-CON Controller for Motorized Shutter is required for use with the Ti2-A/Ti2-U

Conditions to Ensure Water-resistant Function of the Nosepiece

  1. Properly attach either of the following to the nosepiece:
    • Objective lens mount: Objective lens or Objective lens mounting hole cap
    • DIC slider mount: DIC slider cap or DIC slider
  2. Properly attach either the supplied water collection tray or the optional Ti2-N-PT nosepiece protection tray.
  3. Exercise caution to ensure that water discharged from the drainage tube does not come into contact with the main unit.

For the safe operation of this product, please follow the instructions in the user manual for proper installation and use.


Dimensions