
AZ-C2+
Système de microscope confocal macro
Suspendu
Spécifications
AZ100 optical zoom | 1-8x (zoom ratio 8 : 1) | |
---|---|---|
C2+ confocal scan zoom | 1x-1000x (continuous variable) | |
Stand | AZ-STE EPI stand/AZ-STD DIA stand | Focus range: 85 mm stroke Coarse focus: 18.5 mm/rotation Fine focus: 3.27 mm/rotation Stage focus: 10 mm range with 0.27 mm/rotation Under software control with remote focus accessory |
Objective | AZ-Plan Apochromat 0.5x (NA 0.05/W.D. 54 mm), AZ-Plan Apochromat 1x (NA 0.1/W.D. 35 mm), AZ-Plan Fluor 2x (NA 0.2/W.D. 45 mm), AZ-Plan Apochromat 4x (NA 0.4/W.D. 20 mm), AZ-Plan Fluor 5x (NA 0.5/W.D. 15 mm) | |
Laser unit | LU-N3: installed laser 405 nm, 488 nm, and 561 nm LU-N4/N4S: installed laser 405 nm, 488 nm, 561 nm, and 640 nm LU-NV series: mountable laser 405 nm, 445 nm, 458 nm, 488 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm and 647 nm | |
Standard fluorescence detector | Number of channels | 3 channels |
Display mode | 160 x 160 to 2048 x 2048 pixels | |
Scanning speed | Standard mode:2 fps (512 x 512 pixels, bi-direction) Zoom:1-1000x Fast mode:8 fps (512 x 512 pixels, bi-direction) Zoom:8-1000x | |
Spectral detector (C2si+) | Number of channels | 32 channels |
1st dichroic mirror | 20/80 beam splitter | |
Corresponding wavelength | 400-750 nm | |
Wavelength resolution | 2.5/5/10 nm (switchable) | |
Minimum wavelength step | 0.25 nm | |
Display mode | 160 x 160 to 1024 x 1024 pixels | |
Scanning speed | Standard: 0.5 fps (512 x 512 pixels, 32 channel simultaneous recording ) | |
Power | Confocal system (PC, monitor, C2+ controller, AOM controller): Approx. 830 W (single phase AC 115 V, 7.2 A / AC 230 V, 3.6 A, with earth) (Does not include microscopes and lasers.) |